3M DP8810NS Acrylic Adhesive 45ml Two Part – Tube

£11.40

 

 

 

 

3M DP8810NS Acrylic Adhesive 45ml – Two Part  – Rapid cure low-odour acrylic adhesive. Reaches handling strength in 10 minutes, structural strength in 20 minutes. Suitable for pre- and post- powder coat application.

Available in Packs of 12

*** ONLY £11.40 Per Cartridge *** 

Specially formulated for use on difficult to bond low energy surfaces i.e. most plastics 3M Scotch-Weld Star Structural Acrylics are the next generation of structural acrylics. An innovative range of structural acrylic adhesives with unique, new features:-

1. Very Low Odour – This class of adhesive can give off an unpleasant odour while curing. This new adhesive is virtually odour-free making it much more pleasant for your operators to use.

2. Fast, strong cure – Achieves structural strength in less than 10 minutes! No waiting around for jobs to set off.

3. 18 month shelf life at normal room temperature – No need to throw away unused tubes that have gone off in storage.

4. Non-Sag – Thixotropic properties reduce drip and subsequent clean-up time

5. Doesn’t get hot when curing – Low heat output on curing does not leave show through ‘witness marks’ on most substrates.

6. High Impact Strength – Not ‘glassy’ like some adhesives, resists sharp shocks well.

7. High Temperature Tolerance – Suitable for both pre- and post- powder coating

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS is a green, non-sag, toughened, two-part acrylic adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 18 minutes. 3M™ Scotch-Weld™ EPX™ Plus II Applicator, mix nozzles and plunger are required (not included).

*** ONLY £11.40 each*** 

Available in Packs of 12

Share and Enjoy !

0Shares
0 0

Warning: sizeof(): Parameter must be an array or an object that implements Countable in /home/andrews2/public_html/wp-content/themes/wp_spectrum/woocommerce/single-product/meta.php on line 17